晋江超骏机械有限公司为您免费提供切捆条机福建切条机价格小型卷布机等相关信息发布和最新资讯,敬请关注!
免费电话:086-0595-85955323
产品详情 您当前的位置:首页 > 供应产品 > 缝合机 > 全自动胶带切条机(自动切台)

全自动胶带切条机(自动切台)

来源:http://www.4006767323.com/supply/51.html 时间:2017/6/14 0:00:00

产品详情


全自动胶带切条机(自动切台)适用范围:

适用于美纹纸、牛皮纸、双面胶、布基胶带、泡棉胶带、胶带,布基、麦拉、汽车泡绵、光学膜、聚脂膜、保护膜及部分无粘性材料等高精度不同规格的分切。

技术参数:

有效门幅:1.35米(另有1.7米、2.05米、2.4米可选)  客户自备5KG空压气源放料气胀轴直径:75 毫米(可订制不同尺寸)      最小切条宽度:1 毫米分切直径:300 毫米(也可定制加大到400毫米)切割精度:±0.05 毫米放料电机功率:5千瓦变频调速                  刀片电机功率:3千瓦变频调速                            电压:380V/220V可选                         外形尺寸:3.2米×1.55米×1.4米

配备特点:

1、全自动胶带切条机(自动切台) 主轴及刀片均采用AC马达搭配变频器无极调速,加减速稳定快速,使切割达到最佳效果。

2、全自动胶带切条机(自动切台)操作面板采用10.4寸LCD触控屏,可直接在屏幕上设定各种切卷条件及运转装况。

3、全自动胶带切条机(自动切台) 中央控制系统为PLC可程式控制器,同轴中可设定多种尺寸(最多20种模式)一次性自动转换切割,做到无人操作自动完成。

4、 全自动胶带切条机(自动切台)刀座移位使用伺服马达配合高精度进口滚珠螺杆进行尺寸定位,并使用线性滑轨承载刀座,定位动作精确平顺。

5、 全自动胶带切条机(自动切台) 进刀使用伺服马达配合高精度进口滚珠螺杆控制,可拟人化做三段式速度进刀切卷,提高效率并得到最好品质。

6、 全自动胶带切条机(自动切台)圆刀自动角度调整:使用伺服马达计算圆刀角度转向,因应不同材料做不同角度变化(角度调整范围±8°) 当切割平面不佳时,可直接变换切割角度,可减少换刀次数,避免了手动调角度的麻烦,大大提高生产效率。

7、 全自动胶带切条机(自动切台)冷却系统:切刀采用真空发生喷水装置,矽溶液冷却,避免切刀粘胶,确保裁切作业顺畅。

8、 全自动胶带切条机(自动切台) 安全防护:切割主轴尾座未合上时,机器无法启动,工作过程中如尾座异常打开,机器自动停机,确保操作人员安全。

9、 全自动胶带切条机(自动切台)(可选配)手动调节或自动调节圆刀角度。

10、全自动胶带切条机(自动切台)(可选配)内置双马达自动磨刀机,始终保持刀口锋利,操作简便。

11、 全自动胶带切条机(自动切台)(可选配)安装了大型安全防护罩,大大提高了机器操作的安全性能。

Application:

Apply textured paper, kraft paper, double sided tape, cloth tape, foam tape, adhesive tape, fabric, Mylar, automotive foam, optical film, polyester film, PE, PVC, PET protective film and non-sticky material part and other high-precision cutting of different specifications.

Technical parameters:

Valid  width: 1.35m (1.7m, 2.05m, 2.4m optional) Client need to provide for himself 5KG air compressorAxle diameter: 75 mm(man-made different sizes)Minimum width of slitting: 1 mmDiameter of slitting: 300 mm(could increase to 400mm)Cutting accuracy: ±0.05 mmMotor power: 5KW frequency controlBlade motor power: 3 KW frequency controlVoltage: 380V/220V selectable  Shapes and sizes: 3.2m×1.55m×1.4m Feature:

1、 principal axis and blade both adopt AC motor to match the transducer with electrodeless .

2、 Operation panel adopt 10.4 inches LCD Touch panel, the customer can set various conditions of and operating condition on screen immediately.

3、 Central control system adopt PLC controller,in the coaxial the customer may set various sizes( 20 patterns at most) and automatic transfer once which achieve unmanned operation.

4、 Tool apron transposition ? adopts servo motor to match the high precision entrance ball screw to locate the size and adopts linear sliding rail to bear the tool apron, which makes the Location  accurate and smooth-going.

5、 Feed adopts servo motor  to match the high precision entrance ball screw to control; thus could rapidly cut and roll in ternary form which increase efficiency and get the best quality.

6、 Circular knife angular adjustment automatically: adopt servo motor to calculate the angle veer and cope with different material to make different angle change (the Range is ±8) when incise flat unsoundly, the customer could directly change its angel and decrease the times of tool changing which avoid the trouble of change angle through manual operation and enhance productivity.

7、 Cooling system: cutter adopts vacuum waterworks and silicon liquor cooling to avoid cutter glue something and ensure the crop operation smoothly.

8、 Safety protection: when the tailstock of incision principal axis isn’t connecting, the machine cannot start, during the working process, if the tailstock unfolds Abnormally, the machine will stop automatically to guarantee the operation Staffs’safety.

9、 (Selectable) adjust the angle of circular knife in manual or automatic.

10、 (Selectable) internally installed automatic tool sharpener equipped with double motors which maintain the knife edge sharp and easy to handle.

(Selectable) completed large-scale security hood, to enhance the safety performance.

相关产品
相关新闻