晋江超骏机械有限公司为您免费提供切捆条机福建切条机价格小型卷布机等相关信息发布和最新资讯,敬请关注!
免费电话:086-0595-85955323
产品详情 您当前的位置:首页 > 供应产品 > 横切横条机 > 全自动高精度横切机

全自动高精度横切机

来源:http://www.4006767323.com/supply/49.html 时间:2017/6/14 0:00:00

产品详情



22CJ-500H全自动高精度横切机适用范围:

全自动高精度横切机适用于无纺布、包袋、商标、烟标、挂历、酒盒、扑克、纸张塑料印刷复合后的卷筒材料的横向裁切。并可跟踪色标横切,裁切长度可任意设定。横切精度及自动化程度高,工作效率高,材料浪费小、整机结构紧凑,造型新颖,安装调试方便、操作简单、低噪音等特性。

技术参数:

有效裁切宽度:500毫米(另有1米、1.3米、1.6米可选)  有效裁切厚度:塑料 0.1~0.5毫米   纸张 75克~450克定长精度:±0.2毫米(视材料不同而定)        最高机械速度:100米/分钟 整机总功率:3.5千瓦                         电压:220V/380V可选外形尺寸:3.4米×1.1米×1.2米

配备特点:

1、 全自动高精度横切机采用进口PLC及进口高精密伺服或步进系统控制切割长度,定长精度达到0.2mm,送料平稳均匀,并有电机故障诊断及保护功能。

2、 全自动高精度横切机操作界面采用LCD中文显示屏,所有操作,只需要一个画面,可同时设定横切宽度和次数,并显示实际切割次数、声光报警,并设有手动/自动转换功能。

3、 全自动高精度横切机可选配色标定位功能,加以完善的自检和逻辑控制功能,当光电跟踪色标超过设定有效范围时,设备将自动停止提示并重新设定。

4、 全自动高精度横切机采用一体式单工位放卷机构. 放卷牵引采用送料压辊+直流电机+浮动辊结构,合理的结构和电器控制保证送料过程中张力的稳定.可保证表面处理(压纹扎孔)后基材最小的拉伸变形。

5、 全自动高精度横切机主电机采用变频调速,保证上下刀运动的快速、平稳。

6、 全自动高精度横切机集中电气控制箱,电气元件分布合理, 每条线都做有记号,诊断维修简单快捷,不易出故障,控制系统更为可靠。

Application:

This machine is suitable for non-woven fabric, bags, trademarks, enlarging, calendars, wine, poker, paper plastic printed compound roll material after the horizontal cut. And track cross-section of color, cut length can be arbitrarily set. Cross-section accuracy and high degree of automation, high efficiency, material waste is small, compact structure, innovative design, easy installation, simple operation, low noise characteristics.  

Technical parameters:

Effective cutting width: 500mm (otherwise 1meter, 1.3meters, 1.6 meters optional) Effective Cutting thickness:  0.1 to 0.5 mm  Plastic paper 75 g - 450 g Length accuracy:  ± 0.2 mm (depending on different materials may be) The maximum mechanical speed:  100 m / min Total power:  3.5 kwVoltage: 220V/380V optional Dimensions:  3.4 m × 1.1m  × 1.2m Feature:

1.Using imported PLC and imported high-precision control of servo or stepper system, cutting length, fixed-length accuracy of 0.2mm, smooth, even feeding, and motor fault diagnosis and protection. 2.Interface with LCD Chinese display, all operations, only one screen, you can also set the width and number of cross-section, and shows the number of actual cutting, sound and light alarm, and with manual / automatic conversion. 3.Optional color standard positioning, to improve the self-test and logic control functions, when the optical tracking color exceeds a set range, the device will automatically stop and reset the prompt. 4.Using one single station to put volume institutions. Warping traction using the feed roller + DC + floating roller structure, reasonable structure and electrical controls to ensure that feeding during the tension stability. To ensure that the surface treatment (embossed bar-hole ) substrate after the minimum tensile deformation. 5.The main motor adopts frequency control, to ensure the rapid movement up and down the knife, smooth. 6.Centralized electrical control box, a reasonable distribution of electrical components, mark each line are doing a diagnostic repair quick and easy, not easy to fail, the control system more reliable.


相关产品
相关新闻